Advance C™ Series

Ultraviolet disinfection units, UV lamp units

Advance C™ Series is ideal for a wide range of light industrial and commercial water & wastewater disinfection applications.

Designed to deliver UV dose*>40mJ/cm2 over a wide range of UVT levels and flow rates up to 40L/min, Advance C™ Series is popular in industries like food & beverage, drinking water treatment, irrigation, process water, aquaculture, healthcare and many commercial businesses. * Contact us for UV sizing advise if you are looking for other UV dose levels, UVT and flow rate combinations.

Advance C™ Series features marine grade SS316 UV reactors, high performance quartz UV lamps matched with tuned electronic ballasts and turbulent flow design in a single lamp reactor configuration to deliver reliable disinfection performance. Options include a choice of power supplies optional UV intensity sensors, UV monitors, PLCs, quartz sleeve wipers, Ozone producing UV lamps and temperature control devices .

Advance C™ Series industrial UV systems are very easy to install, easy to use, easy to maintain and known to be very reliable.

Features & Benefits

  • Reliable disinfection performance
  • UV dose modeling software based design
  • WaterMark Level1 certified (Certificate No: ISC-WM030024-I01-R00)
  • Non-chemical, no residues, no change to water chemistry
  • Very economical (typical disinfection cost is below fraction of a cent per litre of water)
  • Robust quality for long life, trouble free operation
  • Easy to install, use & maintain
  • Single lamp UV reactors
  • Turbulent flow for uniform UV dose distribution
  • High performance monochromatic ultraviolet lamps with peak wavelength at 254nm
  • Tuned electronic ballasts
  • High %UVT quartz thimbles
  • Custom units available


UV System Selection

Sizing of correct UV unit depends on factors including

  • Desired UV Dose
  • Peak flow rate
  • %UVT10 of water

Advance C™ Series for water with 80-98% UVT

The table below shows Advance ADV-C™ Series UV units for EOL (end of lamp life) UV Dose of 25mJ/cm2 (250J/m2) @98%UVT10. For other UV dose, Peak Flow Rate and %UVT requirements, please contact us.

Advance ADV-C Series UV System PEAK FLOW @250 J/M2 [Ltr/Min] PEAK FLOW @250 J/M2 [M3/HR] ELECT. POWER [W] Connections
ADV-C-50 8 0.5 12 ¾” BSP Male
ADV-C-100 13 0.75 20 ¾” BSP Male
ADV-C-200 23 1.38 30 1” BSP Male
ADV-C-250 68 4.06 55 1” BSP Male
ADV-C-400 633 38 42 1.5” BSP Male
ADV-C-500 111 6.67 80 1.5” BSP Male
ADV-C-700 113 6.8 80 2″ BSP Male
ADV-C-1200 222 13.34 140 2” BSP Male
ADV-C-1600 288 17.3 190 2” BSP Male
ADV-C-1800 345 20.7 200 2” BSP Male
ADV-C-2000 615 36.92 275 2” BSP Male
ADV-C-5500 1188 71.3 490 3” Tab E Flange

Advance C™ Series for water with 40-80%UVT

Some Advance ADV-C™ Series models are designed to handle variations in UVT from 40% to 80%. For example, some Advance ADV-C™ Series are used at 40% UVT and are found to provide reliable inactivation of fecal coliforms in installations.

For advise on sizing a UV unit at low UVT, please contact us.

Wide Choice of Power Supplies

Different versions available all with standard 10A GPO plug and 2m lamp lead.

UV Electronic ballast
Advance BRK™ Series basic power supply

Advance – BRK™ Power Supply

Suitable for all models from ADV-C50 to ADV-C400 Includes visible and audible lamp fail alarm, for indoor operation only. Dimensions: 105 x 60 x 30 mm, Weight: 0.4 kg. Optional weatherproof IP65 outdoor version available.

Advance UV Controller DDCV™
Advance DDCV™ Series UV Power Supply

Advance – DDCV™ Power Supply

Suitable for all models from ADV-C50 to ADV-C1800 Includes visible and audible lamp fail alarm, volt free contacts (BMS), lamp operation count down timer 365- 0days, lamp change alert, for indoor operation only. Dimensions: 205 x 75 x 53 mm, Weight: 0.7 kg Optional weatherproof IP65 outdoor version available.Weatherproof UV control panel

Advance – DDCV-IP65™ Weatherproof Power Supply

Advance – DDCV-IP65™ Power Supply

Suitable for all models from ADV-C50 to ADV-C1800. Includes visible and audible lamp fail alarm, volt free contacts for BMS integration, lamp operation count down timer 365- 0days, lamp change alert, for indoor or outdoor installation.Weatherproof UV controller IP65.

Advance M™ Series Power Supply
Advance M™ Series Power Supply with UV intensity sensor & monitor

Advance PRO™ Power Supply with UV Intensity Monitor

Available from all ADV-C series models includes power on indicator, visible and audible lamp fail alarm, UV Intensity Monitor, volt free contacts (BMS) optional, hours run meter, IP65(IP54 for fan cooled versions). Dimensions:300 x 300 x 150 mm, Weight:5.5 kg

Advance-C™ Series Power Supply Comparison

Feature BRK DDCV Series PRO
System Status Indicators
UV Lamp Fail Alarm
UV Lamp Hour Counter
UV Lamp Change Pre-Alert Optional
UV Lamp Change Reminder Optional
Volt Free Contacts (BMS)for fault indication Optional
UV Intensity Monitor Optional
VFCs for Low UV Intensity Alarm Optional
Fan Cooling with Air Filter Not Required IP21 (IP65 optional) (When Required)
Protection Class IP21 (IP65 optional) IP23 (IP65 optional) Optional IP65 for some models (IP54 for fan cooled versions)

Options: (additional cost)

  • UV intensity monitor & sensor
  • Stainless steel enclosure or glass reinforced polyester enclosure
  • Spare set of volt free contacts (BMS)
  • Longer lamp lead
  • Different mains supply
  • Chamber thermostat with solenoid valve for over-temperature protection
  • Sampling ports
  • Quartz sleeve wiper
  • Thermal Relief Value
  • 12/24V DC input (for ADV-C50 to ADV-C400)
  • Twin chamber Configuration
  • Z configuration (Water fitting on opposite sides of chamber)

Advance ADV-C™ Series Spare Parts

To get the desired disinfection performance from your Advance C™ Series UV unit, we recommend regularly servicing the UV unit, replacing the UV lamp, O ring and cleaning the quartz thimble.

Advance C™ Series UV lamp numbers are etched on the lamp body near the pins and include UV Lamp LL020-S4™, UV Lamp LL020-S4-O™, UV Lamp LL030-S4™, UV Lamp LL030-S4-O™, UV Lamp LL040-S4™, UV Lamp LL040-S4-O™, UV Lamp LL046A-S4™, UV Lamp LL079-S4™, UV Lamp LL080-S4™, UV Lamp LL120-S4™, UV Lamp LL127-S4™, UV Lamp LL172-S4™, UV Lamp LL180-S4™, UV Lamp LL180-S4-O™, UV Lamp LL235-S4™, UV Lamp LL235-S4-O™, UV Lamp LL320-S4™, UV Lamp LL450-ST4™ and UV Lamp LL450-ST4-O™.

To check the Advance UV Lamp number hold the lamp against light and clear background. You can also write down the reactor number with RE prefix from the stainless steel UV chamber before contacting us or your nearest Advance UV sales & service partner.

Contact us for with any UV related questions or your Advance UV Lamp number and Advance UV reactor number for advise or any Advance UV lamps, Advance UV quartz sleeves, Advance UV ballasts, Advance UV O rings, Advance UV sensors and Advance UV spare parts. We would be delighted to put you in contact with the right Advance UV sales and service partner for Advance ADV-C and ADV-C LT spares & service.

Advance ADV-C Series: Technical Summary

Operating Parameter Generally Recommended Range
Peak Flow Rate (m3/hr) [Note1] 0.5m3/hr to 50m3/hr
Peak Flow Rate (lpm) [Note1] 10lpm to 833lpm
%UVT10 40% to 98%+
Operating Water Pressure (kg/cm2) 1kg/cm2 to 10kg/cm2
Operating Water Temperature 4oC to 85 oC
Input Power Required 230V AC, 50-60Hz OR 12V DC

* Contact us for model selection to suit your application
Note1: Recommended peak flow rate depends on factors like desired EOL UV Dose, %UVT of water, etc.