Advance M™ Series saltwater UV lamp units are built from robust polymer UV reactors. As a result, they have proven to offer long term, reliable saltwater UV disinfection performance in corrosive environments.
Our saltwater UV units are available in single or multiple UV lamp polymer UV reactors, choice of power supplies and optional UV intensity sensors and monitors. We can also offer customs polymer UV units for high dose, high flow UV disinfection applications found in large fish farms.
Popular applications of Advance M™ Series include disinfection in corrosive environments like saltwater fish farms, fish hatcheries, aquaculture plants, saltwater disinfection, seawater disinfection, saltwater treatment plants, seawater RO plants, chloramine control in pools, hydrotherapy pool water disinfection, etc.
Features & Benefits
- Reliable disinfection performance
- UV dose modeling software based design
- Robust, corrosion resistant construction in HDPE or UPVC
- Non-chemical, no residues, no change to water chemistry
- Very economical (typical disinfection cost is below fraction of a cent per litre of water)
- Robust quality for long life, trouble free operation
- Easy to install, use & maintain
- Single lamp or multiple lamp UV reactors
- Low pressure or medium pressure UV lamps
- High %UVT quartz thimbles
- Custom saltwater UV units available
UV System Selection
Sizing of correct UV unit depends on factors including
- Desired UV Dose
- Peak flow rate
- %UVT10 of water
Advance ADV-M™ Series for water with 80-98%UVT
The table below shows Advance ADV-M™ Series UV units for EOL (end of lamp life) UV Dose of 25mJ/cm2 (250J/m2) @98%UVT10. If you require a different UV Dose, Peak Flow Rate & %UVT, please contact us.
|ADVANCE ADV-M™ SERIES UV SYSTEM||PEAK FLOW @250 J/M2 [Ltr/Min]||PEAK FLOW @250 J/M2 [M3/HR]||ELECT. POWER [W]||CONNECTIONS|
Wide Choice of Power Supply Boxes
Different versions available all with standard 10A GPO plug and 2 M lamp lead.
Advance – BRK™ Power Supply
Suitable for all models from ADV-C50 to ADV-C400 Includes visible and audible lamp fail alarm, for indoor operation only. Dimensions: 105 x 60 x 30 mm, Weight: 0.4 kg. Optional weatherproof IP65 version available.
Advance – DDCV™ Power Supply
Suitable for all models from ADV-C50 to ADV-C1800 Includes visible and audible lamp fail alarm, volt free contacts (BMS), lamp operation count down timer 365- 0days, lamp change alert, for indoor operation only. Dimensions: 205 x 75 x 53 mm, Weight: 0.7 kg. Optional weatherproof IP65 version available.
Advance PRO™ Power Supply with UV Intensity Monitor
Available from all ADV-C series models includes power on indicator, visible and audible lamp fail alarm, UV Intensity Monitor, volt free contacts (BMS) optional, hours run meter, IP65(IP54 for fan cooled versions). Dimensions:300 x 300 x 150 mm, Weight:5.5 kg
ADV-M™ Series Power Supply Comparison
|System Status Indicators|
|UV Lamp Fail Alarm|
|UV Lamp Hour Counter|
|UV Lamp Change Pre-Alert||Optional|
|UV Lamp Change Reminder||Optional|
|Volt Free Contacts (BMS)for fault indication||Optional|
|UV Intensity Monitor||36.92||Optional|
|VFCs for Low UV Intensity Alarm||195||Optional|
|Fan Cooling with Air Filter||Not Required||IP21 (IP65 optional)||(When Required)|
|Protection Class||IP21 (IP65 optional)||IP23 (IP65 optional)||Optional IP65 for some models (IP54 for fan cooled versions)|
Options: (additional cost)
- UV intensity monitor & sensor
- Stainless steel enclosure or glass reinforced polyester enclosure
- Spare set of volt free contacts (BMS)
- Longer lamp lead
- Different mains supply
- Chamber thermostat with solenoid valve for over-temperature protection
- Sampling ports
- Quartz sleeve wiper (manual)
- Twin chamber Configuration
- Z configuration (Water fittings on opposite sides of chamber) or U configuration (water fittings on the same side of chamber)
Advance M™ Series Spare Parts
To get the desired disinfection performance from your Advance M™ Series UV unit, we recommend regularly servicing the UV unit, replacing the UV lamp, O ring and cleaning the quartz thimble.
Advance C™ Series UV lamp numbers are etched on the lamp body near the pins and include UV Lamp LL020-S4™, UV Lamp LL020-S4-O™, UV Lamp LL030-S4™, UV Lamp LL030-S4-O™, UV Lamp LL040-S4™, UV Lamp LL040-S4-O™, UV Lamp LL046A-S4™, UV Lamp LL079-S4™, UV Lamp LL080-S4™, UV Lamp LL120-S4™, UV Lamp LL127-S4™, UV Lamp LL172-S4™, UV Lamp LL180-S4™, UV Lamp LL180-S4-O™, UV Lamp LL235-S4™, UV Lamp LL235-S4-O™, UV Lamp LL320-S4™, UV Lamp LL450-ST4™ and UV Lamp LL450-ST4-O™.
To check the Advance UV Lamp number hold the lamp against light and clear background. You can also write down the reactor number with RE prefix from the stainless steel UV chamber before contacting us or your nearest Advance UV sales & service partner.
Contact us for with any UV related questions or your Advance UV Lamp number and Advance UV reactor number for advise or any Advance UV lamps, Advance UV quartz sleeves, Advance UV ballasts, Advance UV O rings, Advance UV sensors and Advance UV spare parts. We would be delighted to put you in contact with the right Advance UV sales and service partner for Advance UV spares & service.
Advance ADV-M Series: Technical Summary
|OPERATING PARAMETER||GENERALLY RECOMMENDED RANGE|
|Peak Flow Rate (m3/hr) [Note1]||0.5m3/hr to 195m3/hr|
|Peak Flow Rate (lpm) [Note1]||10lpm to 833lpm|
|%UVT10||40% to 98%+|
|Operating Water Pressure (kg/cm2)||1kg/cm2 to 10kg/cm2|
|Operating Water Temperature||4oC to 60oC|
|Input Power Required||230V AC, 50-60Hz OR 12V DC|
* Contact us for model selection to suit your application
Note1: Recommended peak flow rate depends on factors like desired EOL UV Dose, %UVT of water, etc.